Installation and Operation

Step 1 – Slide off the battery cover and install 4AA batteries (included) in the battery pack while observing the marked polarity.

Step 2 – If you already own a BBQ Guru adaptor or have a cooker that requires one, make sure the adaptor is properly installed on your cooker. Place your fan nozzle into the adaptor’s opening until it is fully inserted. Insert the nozzle so that the BBQ Guru logo is facing up towards the sky.


Step 3 – Clip the pit probe to the top of the cooking grate inside your cooker and turn the power switch on. Adjust the setpoint using the UP DOWN keys. blobid1.pngblobid0.png

Was this article helpful?
0 out of 0 found this helpful