DynaQ Connecting to Bluetooth

Follow the instructions below to connect your DynaQ to Bluetooth using the BBQ Guru App. 

Step 1: Download the BBQ Guru App onto your mobile device.

Apple App Store

Android App Store

Step 2: Turn Bluetooth ON on your mobile device.

Step 3: Open the app and follow the prompts on the screen to connect to Bluetooth. 

Note: You must connect your DynaQ to Bluetooth through the App, NOT through your mobile device's settings

If a pop-up asks if you would like to use Bluetooth, click “OK”. Then click “Continue to Device Connection”. On the next screen click "Connect Controller" and wait for the app to search for your controller.

Let_s_Get_Grilling.png     Pair_Your_Controller.png

Step 4: Once you see your controller name in the box, click on it and allow for the App to sync.

Searching_for_Controller.png Syncing_Controller.png

Note: If this is the first time you are powering on your DynaQ, it will perform a mandatory firmware update. This will take a few minutes.


Step 5: Give your controller a unique name (do not use any special characters) and then click "Start Grilling".



If an error occurs during pairing, a notification will be displayed within the app. Check the settings on your Bluetooth-enabled device to ensure that Bluetooth is turned ON and then click try again.


When the DynaQ is NOT connected to a mobile device, the blue connectivity LED indicator light will blink slowly.


Once your mobile device is paired successfully with the DynaQ, the Bluetooth LED indicator light on the DynaQ will glow solid blue. 


Once the app is connected to Bluetooth, the app's main screen will appear. For here you can change the pit temperature, food done temperature, set alarms, access the help center, and more.

Was this article helpful?
0 out of 0 found this helpful